ICND 2 – Interconnecting Cisco Network Devices 2 (Future Media Concepts, Orlando)
Event on 2012-11-12 00:00:00
Building on the skills provided by ICND1 (Interconnecting Cisco Network Devices 1), ICND2 not only delivers essential information needed to pass the CCNA certification exams, it also gives you a solid technical foundation to ensure that you can succeed on the job.
We've added our own real-world, hands-on labs designed by expert instructors to give you experience with practical scenarios, including issues involved when you expand the switched network from a small to medium network environment.
Whether your goal is simply to familiarize yourself with Cisco technology or to become a Cisco Certified Internetworking Expert, start with ICND1 and ICND2. To further ensure your success, you'll receive:
One free exam voucher for 640-816 ICND2
Free ICND2 Self-Paced e-Learning CD
Access to our enhanced lab topology including two routers and one switch per pod
Five extra ICND2 e-Lab credits, good for 30 days, so you can practice and refine your skills
Kaplan SelfTest's exam prep products
What You'll Learn
Review how to configure and troubleshoot a switch and router in a small network environment
Expand the switched network from a small to medium network environment
Issues with redundant switching
Spanning Tree Protocol (STP)
Concepts of VLANs and trunking
Routing between VLANs
Configure, verify, and troubleshoot OSPF and EIGRP
When to use access control lists (ACLs) and how to configure, verify, and troubleshoot them
Configure NAT and PAT
Configure IPv6 addressing and Routing Information Protocol new generation (RIPng)
Configure PPP, CHAP, and PAP
Frame Relay operation and troubleshooting
Who Should Attend
Network technicians and specialists looking to increase their knowledge of medium-sized switched and routed networks
Anyone looking to achieve CCNA certification
Firm background in data networking
Some hands-on experience with Cisco routers and switches
Basic working knowledge of switches and routers
Complete understanding of the OSI model, IP addressing, and IP subnetting
ICND1 – Interconnecting Cisco Network Devices 1
Note: The curricula below comprise activities typically covered in a class at this skill level. The instructor may, at his/her discretion, adjust the lesson plan to meet the needs of the class.
Lesson 1: Small Network Implementation
Lesson 2: Medium-Sized Switched Network Construction
VLANs and Trunks
Spanning Tree Performance Optimization
Routing Between VLANs
Securing the Expanded Network
Troubleshooting Switched Networks
Lesson 3: Medium-Sized Routed Network Construction
Lesson 4: Single-Area Open Shortest Path First (OSPF)
Lesson 5: Enhanced Interior Gateway Routing Protocol (EIGRP)
Lesson 6: Access Control Lists (ACLs)
Configuring and Troubleshooting ACLs
Lesson 7: Address Space Management
Scaling the Network with NAT and PAT
Transitioning to IPv6
Lesson 8: LAN Extension into a WAN
Establishing a Point-to-Point WAN Connection with PPP
Establishing a WAN Connection with Frame Relay
Troubleshooting Frame Relay WANs
Lab 1: Implementing a Small Network (Review Lab)
Configure your workgroup switch and router with a basic configuration based on the network information provided.
Lab 2: Enhanced – Configuring Expanded Switch Networks
Expand the switch configuration to meet specific VLAN and network requirements.
Lab 3: Enhanced – Troubleshooting Switched Networks
Use troubleshooting methods discussed to diagnose, isolate, and correct problems commonly found in a switched network.
Lab 4: Enhanced – Implementing OSPF
Configure your workgroup routers to use the dynamic routing protocol OSPF.
Lab 5: Enhanced – Troubleshooting OSPF
Use troubleshooting methods discussed to diagnose, isolate, and correct problems commonly found when running the OSPF routing protocol.
Lab 6: Enhanced – Implementing EIGRP
Configure your workgroup routers to migrate from OSPF to EIGRP.
Lab 7: Enhanced – Troubleshooting EIGRP
Use troubleshooting methods discussed to diagnose, isolate, and correct problems commonly found when running the EIGRP routing protocol.
Lab 8: Enhanced – Implementing ACLs
Create IP standard, extended, and named ACLs and verify that they are working
Lab 9: Exclusive – Troubleshooting ACLs
Troubleshoot common IP ACL issues.
Lab 10: Enhanced – Configuring Network Address Translation (NAT) and Port Address Translation (PAT)
Configure your workgroup routers to use static and dynamic NAT and PAT.
Lab 11: Enhanced – Implementing IPv6
Configure IPv6 addresses on your workgroup routers and deploy RIPng between them.
Lab 12: Enhanced – Establishing a Frame Relay WAN
Create a Frame Relay connection to the other pod router and to the core router using a serial interface on each pod router.
Lab 13: Enhanced – Troubleshooting Frame Relay WANs
Use troubleshooting methods discussed to diagnose, isolate, and correct problems commonly found in a Frame Relay network.
Lab 14: Exclusive – The Super Lab
Rebuild the configuration on the pod devices from scratch, including security, IP addressing, interface encapsulations, and routing protocol.
Duration: 5 days
Time: 8:30am – 5:00pm
Contact: Cari Jones, Corporate Account Manager
FUTURE MEDIA CONCEPTS, INC., the nation's premier digital media training center, provides manufacturer-authorized training in all areas of digital media including digital video and film editing, web design and development, sound design, DVD authoring, 3D animation, motion graphics, desktop publishing, architectural and mechanical design and Mac IT. FMC is an authorized training provider for Adobe, Apple, Autodesk, Avid, Boris FX, Digidesign, NewTek and Softimage. Founded in 1994, FMC has training centers located in New York, Boston, Philadelphia, Washington DC, Orlando, Chicago and Dubai. www.fmctraining.com
at Orlando, Florida, United States
Contact event organizer for details
Orlando, United States